The circular movement of the control lever is transformed into linear movement of the rod. This series is mostly used to fasten hinged lids and for containers. Available with forces from 160 to 1000 daN, and in the heavy series from 1700 to 4000 daN. The push bars can be adjusted within the stroke (height D).
The control and clamping levers move in opposite directions. When clamping is obtained, the control lever is in the horizontal position. Available with clamping forces between 40 and 620 daN.
The rotational moulding of the plastic requires clamping devices able to work in a quick and safe way at very high temperatures (240-300°C.) without any hesitation when opening and clamping. So, we have achieved a full series of clamps suitable to this type of work. This series is in part a spin off from the Speedy Block’s mass production with the contribution of suitable alterations (couplings with different tolerances, modified geometries, different finishings, etc.), and in part is achieved following the suggestions and expectations of the users which urged their design.
Reinforced long life series: the hot forged parts, as well as hardened and ground pivots and bushings make this series suitable for heavy duty loads and a long operating life.
Toggle mechanism: the accessories such as clamping arm and control lever, can be welded according to applications for use.
In this series, the circular movement of the control lever is transformed into a linear movement of the push rod. Excepted for models 120/AS and 300/AS, this series works and clamps either by pushing or pulling. The light version meets clamping requirements from 80 to 720 daN, while the heavy series from 120 to 4500 daN.
HEAVY-DUTY SERIES: Base made of black varnished spheroidal cast iron. Other parts made of galvanized (weldable) steel. Supporting pivots undergo case hardening.
REINFORCED HEAVY-DUTY SERIES: Base body made of black phosphated steel sheet; cemented and ground support pins and bushes. Double-acting cylinder with adjustable shock absorption. The tools of this series are built so as to be easily disassembled: the pivots are fixed axially with seeger rings.
The following accessories Series Long Life.
The circular movement of the control lever is transformed into linear movement of the rod. This series is mostly used to fasten hinged lids and for containers. Available with forces from 160 to 1000 daN, and in the heavy series from 1700 to 4000 daN. The push bars can be adjusted within the stroke (height D).
Accessories for mounting